\r\n
U8 VEHICLE MOUNT: Use this vehicle mount kit to attach any u8 terminal or u8 ODU to a vehicle roof rack. This mount requires that the roof rack crossbars are less than 7.7 cm wide and the closest points on the forward/aft crossbars are 92.8 cm apart. What's in the kit:
\r\n
\r\n - Mounting rails
\r\n - Hardware to secure the rails to the terminal or ODU
\r\n - Clamps/hardware to secure the rails to the vehicle roof rack
\r\n - Padlock
\r\n - Installation instructions
\r\n
\r\n
UNIVERSAL MOUNTING PLATE: This universal mounting plate can be used to modify an existing u7 mounting structure to accommodate a u8 Commercial, GOV terminal, or u8 ODU or can be used for any static/stationary installation. The following images detail the universal mounting plate and the u8 terminal and u8 ODU mounting hole locations. The primary mounting points on the ODU and terminal have 15 mm of M10 x 1.25 mm threading with a maximum hole depth of 20 mm. What's in the kit:
\r\n
\r\n - Mounting plate
\r\n - Stand-off posts
\r\n - Fasteners
\r\n - Installation instructions
\r\n
\r\n
U8 VEHICLE POWER, 25' (7.5 M) CABLES: Use this vehicle power kit to power any u8 terminal or u8 ODU from a vehicle battery. The vehicle power kit is rated to IP66. What's in the kit:
\r\n
\r\n - 25’ of cable
\r\n - Connectors, fuse, and circuit breaker
\r\n - Abrasion-resistant wire shielding
\r\n - Installation instructions
\r\n
\r\n
RX, TX, DATA FOR ODU, 25' (7.5 M) CABLES: Use this IP66 rated cable kit to attach your Kymeta u8 ODU to an external modem. What's in the kit:
\r\n
\r\n - (2) LMR-240 N-Male to N-Male 7.5 m (25 ft.) cables
\r\n - (1) RJ45 to RJ45 7.5 m (25 ft.) cable
\r\n - N-to-F adapters
\r\n - Installation instructions
\r\n
\r\n
AC-TO-DC POWER KIT: Use this AC-to-DC power kit to power the u8 terminal or u8 ODU from a 120/240 VAC wall outlet. What's in the kit:
\r\n
\r\n - 600 W, 24 VDC AC-to-DC power supply
\r\n - W38D terminal input power cable, 244 cm (96 in.)
\r\n - W73 AC input cable, 45.7 cm (18 in.)
\r\n - North America (NEMA 5-15) to IEC C13 plug
\r\n - EU (CEE 7/7) to IEC C13 plug
\r\n - M6 shroud fasteners
\r\n - Installation instructions
\r\n
\r\n
U8 GO CASE: Kymeta™ u8 GO case for any u8 Commercial or GOV terminals. What's in the kit:
\r\n
\r\n - 25° tilt mechanism
\r\n - Integrated vehicle mount
\r\n - AC-to-DC power
\r\n - Transportation hardshell case
\r\n - Kymeta u8 GO quick start guide
\r\n - Installation instructions
\r\n
\r\n
U8 MRZR MOUNT: The Kymeta MRZR mount is designed specifically to integrate with the Polaris MRZR Tactical off-road vehicle. The mount allows the toolless installation of any u8 terminal or ODU to the factory roll cage of the MRZR. What's in the kit:
\r\n
\r\n - Hardware to secure the rails to the MRZR
\r\n - Clamps to secure the rails to the MRZR roll cage
\r\n - Integrated brush bar
\r\n - Installation instructions
\r\n
\r\n
MIL TRANSPORT CASE (TAN, GREEN, GREY): Transportation hard-shell case with built-in tie-down points for the MIL Terminal. What's in the kit:
\r\n
\r\n - u8 Transport Case
\r\n
\r\n
\r\n